Configuring port WAN to LAN in UCR device
Ori Ziv
Jul-13th, 2023 6:40

These steps will demonstrate how to configure port WAN into LAN on UCR devices:

1)  Go to Network >>LAN

    2) Press on advanced settings:

    **Pay attention that if you WAN connection (Operation mode is determande to wired it won’t let you change the WAN port to LAN**

    Suppose to be configured for mobile or WIFI

    You can check on status>> Network>> WAN & LAN that port WAN has been changed

    Was this article helpful?
    0 out of 0 found this helpful